DescriptionSpecial grade for the sealing of conical or cylindrical pipe threads e.g. Whitworth threads according to DIN 2999 up to 3 inches. Product gives flexible film with an breaking elongation of more than 100%. The contained PTFE powder lowers the friction. Certified acc. to DVGW (DIN EN 751-1) and NSF Standard ANSI 61 for use in commercial and residential drinking water systems not exceeding 82°C. NSF S2 (P1) listed for use in food processing areas.The Ergo 4205 is specifically formulated for sealing conical-cylindrical pipe joints with a diameter of up to three inches. The sealant contains Teflon which is easy to remove and can be used in the presence of pure oxygen up to 60 °C /10 bar.SpecificationsViscosity: 40000 – 60000 mPas (spindle 6, 2,5 rpm) 15000 – 20000 mPas (spindle 6, 20 rpm)Density: 1.0 g/cm³Initial Strength: 15-30 minutesFunctional Strength: 1-3 hoursFinal Strength: 12 hoursHazard FreeIncreased health and safety at the workplaceMinimisation of skin irritations and allergiesReduced environmental footprintApprovalsWRAS Approved – BS6920-1:2000 and/or 2014 Suitability of non-metallic products for use in contact with water intended for human consumption with regard to their effect on the quality of the water.NSF – ANSI 61 = For use in contact with drinking water.NSF – P1 = Listed for use in food processing areas.DVGW / DIN EN751-1 = According to DVGW TRGI 2008, in Germany not allowed for use in household gas-installations.TIS_4205_e
English